Necessary

Needed for the site to work, such as your quote list and this choice. No cookies are sent to third parties.

Always on

Google Analytics: statistics on page views and clicks, without your name or contact details.

Google Ads: measures whether our ads lead to quote requests.

Hand pumps for wells · Made in Finland

Nira 67 Stainless, Frost-Proof Hand Pump for Wells

Modern, rustproof and frost-proof.

A stylish, frost-proof pressure pump for garden wells and drilled wells. It develops approx. 1 bar (≈ 14.5 psi), so you can connect a garden hose and move water further – even uphill. Suitable for drinking water.

Pumping capacity
40 l/min≈ 10.6 US gal/min
Pressure
1 bar≈ 14.5 psi
Frost resistance
-30 °C-22 °F
Ask for a quote

Manual & CAD downloads Where to buy

Product description

Water with pressure – also uphill

The Nira 67 suits both traditional garden wells and drilled wells. It develops approx. 1 bar (≈ 14.5 psi) of pressure. The spout has a ¾" internal thread for a standard garden-hose fitting, so you can move water further and higher than the pump. A hose with an inner diameter of 25 mm (≈ 1.0 in) is recommended.

Installation depth

Maximum installation depth 27.5 m (≈ 90 ft), measured from the well cover.

The basic package includes two 1 m (≈ 3 ft) pipe modules and a 0.5 m cylinder, reaching 2.5 m (≈ 8 ft) below the well cover. Pipe modules of 0.5 m, 1 m (≈ 3 ft) and 3 m (≈ 10 ft) are installed between the pump and the cylinder. Below the cylinder you can add up to 6 m (≈ 20 ft) of suction pipe; if the suction pipe is longer than 1.5 m (≈ 5 ft), fit a bottom valve at its end.

The cylinder diameter is 90 mm (≈ 3.5 in), so the well cover needs a hole of approx. 100 mm (≈ 3.9 in), and a drilled well must be more than 9 cm (≈ 3.5 in) in diameter. The base flange is 22 cm (≈ 8.7 in) in diameter, and the base flange gasket is included.

Frost-proof and rustproof

The pump drains itself after use. It is frost-proof when the cylinder is below the frost line, approx. 2 m (≈ 7 ft) below ground. The design is rustproof, and the composite upper body cover can be changed to another colour afterwards. Upper body cover colours: blue, red and grey; the lower body cover and base flange are cast silumin.

Technical specifications

The essentials, all in one place.

Technical specifications – Nira 67 well pump, product code 1067SB
SuitabilityWater
Pumping capacity40 l/min (≈ 10.6 US gal/min)
Pressure1 bar (≈ 14.5 psi)
Frost resistance-30 °C (-22 °F)
UsageYear-round use
MaterialStainless steel, plastic, nitrile rubber
Weight18.5 kg (≈ 40.8 lb)
Package dimensions115 x 45 x 20 cm (≈ 45.3 x 17.7 x 7.9 in)
Country of originFinland
Warranty2 years

Values for version 1067SB – Blue.

Choose for your application

  • Garden wells
  • Drilled wells
  • Cabins
  • Backup water

Important for installation

  • The pump is frost-proof when the cylinder is installed below the frost line (approx. 2 m (≈ 7 ft) below ground) and the drain hole above the cylinder is open. If the water in the well freezes, the pump will also freeze.
  • Leave 40–50 cm (≈ 15.7–19.7 in) between the lower end of the pump and the bottom of the well so that the pump does not draw in sand. Sand blocks and damages the pump if it reaches the cylinder.

Read the installation manual

Videos

See the pump in use and how to install it.

  • Installing the Nira 67 well pump

    YouTube

Downloads & resources

Everything you need to plan, install and maintain.

  • PDF · English

    Instruction manual

    Installation, use and maintenance

    709 KB

  • 3D CAD · STEP

    3D STEP model

    For planning your installation

    7.7 MB

  • Spare parts · Drawing

    Nira 67 spare parts

    Exploded-view drawing of the pump

Let’s find the right pump.

Tell us what you need to pump. We’ll help you choose the pump and seals.

Phone +358 10 830 6759 · Email nira.info@nira.fi