Hand pumps for wells · Made in Finland
Nira 1 Antique Cast Iron Hand Pump for Garden Wells
Image 1 of 3 · Nira 1 Antique well pump – Basic package (2.5 m)
A classic since 1934.
A stylish, frost-proof antique-style cast iron hand pump for garden wells. Suitable for drinking water; the cast iron body is plastic-coated on the inside.
- Pumping capacity
- 40 l/min≈ 10.6 US gal/min
- Weight
- 35 kg≈ 77.2 lb
- Frost resistance
- -30 °C-22 °F
Product code: 1000
Manual & CAD downloads Where to buy
Product description
Timeless design
The first Nira 1 antique pump was made in 1934. The cast iron body is plastic-coated on the inside, and the other parts are stainless steel or HDPE plastic. The Nira 1 Antique does not create pressure.
Installation
The basic package reaches approx. 2.5 m (≈ 8 ft) from the well cover to the base of the cylinder. A suction pipe of up to 6 m (≈ 20 ft) can be added below the cylinder (1¼" internal thread); a suction pipe longer than 1.5 m (≈ 5 ft) needs a bottom valve. The cylinder diameter is 90 mm (≈ 3.5 in), so the well cover needs a 100 mm (≈ 3.9 in) hole.
Technical specifications
The essentials, all in one place.
| Suitability | Water |
|---|---|
| Pumping capacity | 40 l/min (≈ 10.6 US gal/min) |
| Frost resistance | -30 °C (-22 °F) |
| Usage | Year-round use |
| Material | Cast iron, stainless steel, HDPE plastic, nitrile rubber |
| Weight | 35 kg (≈ 77.2 lb) |
| Package dimensions | 115 x 45 x 20 cm (≈ 45.3 x 17.7 x 7.9 in) |
| Country of origin | Finland |
| Warranty | 2 years |
Choose for your application
- Garden wells
- Courtyards
- Cabins
Important for installation
- The pump is frost-proof when the cylinder is installed below the frost line (approx. 2 m (≈ 7 ft) below ground) and the drain hole above the cylinder is open. If the water in the well freezes, the pump will also freeze.
- Leave 40–50 cm (≈ 15.7–19.7 in) between the lower end of the pump and the bottom of the well so that the pump does not draw in sand. Sand blocks and damages the pump if it reaches the cylinder.
Downloads & resources
Everything you need to plan, install and maintain.
PDF · English
Instruction manual
Installation, use and maintenance
923 KB
3D CAD · STEP
3D STEP model
For planning your installation
Spare parts · Drawing
Nira 1 Antique spare parts
Exploded-view drawing of the pump
Let’s find the right pump.
Tell us what you need to pump. We’ll help you choose the pump and seals.
Phone +358 10 830 6759 · Email nira.info@nira.fi