Hand pumps · Made in Finland
Nira 6B Viton Hand Pump for Petrol (Gasoline)
Image 1 of 6 · Nira 6B Viton hand pump – 1" flanges · Viton
For petrol, solvents and engine cleaners.
The Nira 6B with Viton seals transfers petrol (gasoline), turpentine, thinner and engine cleaners by hand. Also available as a grounded version with all parts electrically connected.
- Pumping capacity
- 40 l/min≈ 10.6 US gal/min
- Suction height with a bottom valve
- Up to 8 m≈ 26 ft
- Frost resistance
- -5 °C23 °F
Manual & CAD downloads Where to buy
Product description
Viton seals for petrol and solvents
Viton seals are intended for petrol (gasoline), turpentine, thinner and engine cleaners. They also suit water, diesel and oils. The frost resistance of Viton seals is -5 °C (23 °F).
Like the other Nira 6B pumps, the Viton version is mostly rustproof, delivers about 40 l/min (≈ 10.6 US gal/min) and has 1" internal threads in its flanges.
Grounded version
In the grounded version (1104X) all parts of the pump are electrically connected to each other. When installing, connect the pump's equipotential bonding cable to the earthing bar of the site and check the conductivity. Fit a strainer at the end of the suction pipe to keep foreign objects out of the pump. Ask Nira for the installation requirements of your site.
Installation
The suction height is 4 m (≈ 13 ft) without a bottom valve and 8 m (≈ 26 ft) with a bottom valve. The pump withstands a momentary pressure of approx. 3 bar (≈ 44 psi) but must not be installed in a network where it is constantly under pressure.
Technical specifications
The essentials, all in one place.
| Suitability | Petrol, turpentine, engine cleaners |
|---|---|
| Pumping capacity | 40 l/min (≈ 10.6 US gal/min) |
| Suction height | 4 m (≈ 13 ft) without bottom valve, 8 m (≈ 26 ft) with bottom valve |
| Pressure | 1 bar (≈ 14.5 psi) |
| Frost resistance | -5 °C (23 °F) |
| Material | Silumin casting, steel, stainless steel, Viton |
| Weight | 3.3 kg (≈ 7.3 lb) |
| Packaging | Plastic packaging |
| Country of origin | Finland |
| Warranty | 2 years |
Values for version 1104 – 1" flanges · Viton.
Choose for your application
- Petrol (gasoline) tanks
- Workshops
- Solvents and engine cleaners
Match the seal material to your liquid before ordering – see liquid suitability.
Important for installation
- When the pump is attached to a fuel tank, make sure the tank cannot empty itself (the siphon effect).
- The pump must not be installed in a network where it is constantly under pressure. It withstands a momentary pressure of approx. 3 bar (≈ 44 psi).
- Not suitable for drinking water: water remains inside the pump after use.
Liquid suitability
Compare seal materials before selecting your pump.
| Seal material | Water* | Diesel | Oils | Special application |
|---|---|---|---|---|
| Nitrile | Suitable | Suitable | Suitable | Glycol |
| Viton | Suitable | Suitable | Suitable | Petrol (gasoline) |
| ECO | Not suitable | Suitable | Suitable | Cold conditions |
| EPDM | Suitable | Not suitable | Not suitable | Acetone (limited) |
* Never for drinking water with Nira 2, Nira 6B or Nira 9. ECO seals are not suitable for pumping drinking water.
Available for this pump: Viton. Nitrile: Nira 6B hand pump, Nira 2 barrel pump · EPDM: Nira 6B hand pump, Nira 2 barrel pump
The information is for reference only; comprehensive knowledge of material suitability requires testing. Confirm the liquid, concentration, temperature and pump version with Nira.
Downloads & resources
Everything you need to plan, install and maintain.
PDF · English
Instruction manual
Installation, use and maintenance
3.0 MB
3D CAD · STEP
3D STEP model
For planning your installation
Spare parts · Drawing
Nira 6B spare parts
Exploded-view drawing of the pump
Let’s find the right pump.
Tell us what you need to pump. We’ll help you choose the pump and seals.
Phone +358 10 830 6759 · Email nira.info@nira.fi