Cold-weather hand pumps · Made in Finland
Nira 6B Universal Hand Fuel Pump for All Fuels and Severe Cold
Image 1 of 7 · Nira 6B Universal fuel hand pump – 1" flanges
One hand pump for every fuel.
A manual fuel pump developed for the demanding needs of tank manufacturers and industry, for all fuel types and extreme conditions. No electricity needed.
- Pumping capacity
- 40 l/min≈ 10.6 US gal/min
- Suction height with a bottom valve
- Up to 8 m≈ 26 ft
- Frost resistance
- -40 °C-40 °F
Manual & CAD downloads Where to buy
Product description
For all fuel types
The Nira 6B Universal was developed for the demanding needs of tank manufacturers and industry. It can be used with all fuel types, also in extreme conditions – a good choice when you need a reliable hand pump for possibly arctic conditions and the same pump must handle any fuel.
The Nira 6B Universal has been tested at -40 °C (-40 °F) in accordance with MIL-STD-810H, also with NATO kerosene F-34 (JP-8).
Same proven Nira 6B design
Like the other Nira 6B pumps, the Universal is mostly rustproof and delivers up to 40 l/min (≈ 10.6 US gal/min). The suction height is 4 m (≈ 13 ft) without a bottom valve and 8 m (≈ 26 ft) with a bottom valve. It is available with ¾" or 1" threaded flanges, with the lever up or down.
Technical specifications
The essentials, all in one place.
| Suitability | Oils, fuel oils |
|---|---|
| Pumping capacity | 40 l/min (≈ 10.6 US gal/min) |
| Suction height | 4 m (≈ 13 ft) without bottom valve, 8 m (≈ 26 ft) with bottom valve |
| Pressure | 1 bar (≈ 14.5 psi) |
| Frost resistance | -40 °C (-40 °F) |
| Material | Silumin casting, steel, stainless steel, NBR Frost rubber |
| Weight | 3.3 kg (≈ 7.3 lb) |
| Packaging | Plastic packaging |
| Country of origin | Finland |
| Warranty | 2 years |
Values for version 1182 – 1" flanges.
Choose for your application
- Field refuelling
- Remote sites
- Tank manufacturers
- Generator refuelling
Important for installation
- Not suitable for drinking water: water remains inside the pump after use.
- The pump must not be installed in a network where it is constantly under pressure. It withstands a momentary pressure of approx. 3 bar (≈ 44 psi).
- When the pump is attached to a fuel tank, make sure the tank cannot empty itself (the siphon effect).
- The lever direction (up or down) is chosen when ordering and cannot be changed afterwards.
Downloads & resources
Everything you need to plan, install and maintain.
3D CAD · STEP
3D STEP model
For planning your installation
Spare parts · Drawing
Nira 6B spare parts
Exploded-view drawing of the pump
PDF · Svenska
Product card
625 KB
Let’s find the right pump.
Tell us what you need to pump. We’ll help you choose the pump and seals.
Phone +358 10 830 6759 · Email nira.info@nira.fi