Hand pumps for wells · Made in Finland
Nira 3B Classic Cast Iron Hand Pump for Wells
Image 1 of 2 · Nira 3B well pump – Basic package (2.5 m)
The classic frost-proof garden well pump.
A classic, frost-proof cast iron hand pump for garden wells, for drinking and household water. The pump drains itself after use and works all year round without electricity.
- Pumping capacity
- 40 l/min≈ 10.6 US gal/min
- Weight
- 22 kg≈ 48.5 lb
- Frost resistance
- -30 °C-22 °F
Product code: 1001
Manual & CAD downloads Where to buy
Product description
Classic cast iron
The pump body and hand lever are cast iron and the body pipe is stainless steel; the pipes inside the well are plastic. The Nira 3B does not create pressure, and a hose fitting cannot be attached to the spout – choose the Nira 67 if you need a hose connection.
Installation
The basic package includes two 1 m (≈ 3 ft) pipe modules and a 0.5 m cylinder, reaching 2.5 m (≈ 8 ft) below the well cover. You can add pipe modules up to a total of 6 m (≈ 20 ft) between the pump and the cylinder, and up to 6 m (≈ 20 ft) of suction pipe below the cylinder; a suction pipe longer than 1.5 m (≈ 5 ft) needs a bottom valve. The total length below the well cover is therefore at most 12.5 m (≈ 41 ft).
The cylinder diameter is 90 mm (100 mm (≈ 3.9 in) hole in the well cover), the base flange diameter is 22 cm (≈ 8.7 in), and the base flange gasket is included. The thread at the bottom of the cylinder is 1¼".
Technical specifications
The essentials, all in one place.
| Suitability | Water |
|---|---|
| Pumping capacity | 40 l/min (≈ 10.6 US gal/min) |
| Frost resistance | -30 °C (-22 °F) |
| Usage | Year-round use |
| Material | Cast iron, stainless steel, HDPE plastic, nitrile rubber |
| Weight | 22 kg (≈ 48.5 lb) |
| Package dimensions | 115 x 45 x 20 cm (≈ 45.3 x 17.7 x 7.9 in) |
| Country of origin | Finland |
| Warranty | 2 years |
Choose for your application
- Garden wells
- Cabins
- Backup water
Important for installation
- The pump is frost-proof when the cylinder is installed below the frost line (approx. 2 m (≈ 7 ft) below ground) and the drain hole above the cylinder is open. If the water in the well freezes, the pump will also freeze.
- Leave 40–50 cm (≈ 15.7–19.7 in) between the lower end of the pump and the bottom of the well so that the pump does not draw in sand. Sand blocks and damages the pump if it reaches the cylinder.
Downloads & resources
Everything you need to plan, install and maintain.
PDF · English
Instruction manual
Installation, use and maintenance
923 KB
3D CAD · STEP
3D STEP model
For planning your installation
Spare parts · Drawing
Nira 3B spare parts
Exploded-view drawing of the pump
Let’s find the right pump.
Tell us what you need to pump. We’ll help you choose the pump and seals.
Phone +358 10 830 6759 · Email nira.info@nira.fi